CPU Coolers

We raffle a Cooler Master Liquid Refrigeration valued at 150 Euros for answering a question

After visiting the Cooler Master stand, we came across a series of novelties in liquid and air cooling systems to which we wanted to dedicate a video showing some of the most outstanding details. We have taken the opportunity to organize a contest with Cooler Master in which we are going to give away their new MasterLiquid ML240P Mirage liquid cooling.

Participating is very simple, you have to watch the following video carefully and at the end of the video we ask you a question (related to products shown in the video) that you must answer through This formulary.

Cooler Master has come to this Computex 2019 with several novelties in its different ranges of products within its huge catalog. Within the solutions for refrigeration they have shown some new designs with various technologies and improvements.

For All In One Liquid cooling systems we start with the MasterLiquid ML240P Mirage, a model where, externally, it stands out for its lighting system ARGB integrated both in the two fans and in the pump. This pump is attached to the cooling block and has a transparent cover to show the different effects of the RGB LEDs, all of them managed from their own controller or from RGB synchronization compatible motherboards.

It will be available in both a version with a single 120mm radiator and a dual 240mm radiator with two fans.

In both cases, the fans have 8 addressable RGB LEDs and a rifle-type bearing system, in addition, the blades of each fan are interconnected with a circular arc that prevents air from dispersing, improving its pressure at the inlet to the radiator.

MasterLiquid ML240P Dual Mirage, the first dual-pump AiO liquid cooling

However, the model that most caught our attention has been the MasterLiquid ML240P Dual Mirage, the first liquid-cooled AiO system on the market with a dual-pump system. With this system the water flow within the circuit is doubled, You have the specific figure in the video along with much more information.

At the moment it is a prototype since Cooler Master is still developing the optimal way to place the two pumps, either by placing both in parallel for the water inlet to the block, or placing a pump at the inlet and another at the outlet. .

In addition, the radiator may end up adapting to improve and optimize the performance of the circuit with a flow greater than that of the conventional model.

The model MasterLiquid ML240P Mirage is already available on the market, while the MasterLiquid ML240P Dual Mirage expected in January 2020.

In addition to these two Mirage models, the company has shown us another prototype called MasterLiquid ML240P Vivid, a model that has a curious LCD screen on the pump / block with a 2.4 inch panel.

It is used to display information such as temperature, pump rpm and allows to display different effects and images.

Air cooling

In air cooling we find the masterAir MA620M, a model based on the heatsink created exclusively for the AMD Threadripper, but, in this case, it is compatible with all sockets on the market, both from Intel and AMD.

It’s a high-performance model that includes an ARGB lighting system on top and a 120mm fan.

A very innovative model is the Cooler Master MasterAir maker 3DVVC. It differs from most heatsinks in that this model dispenses with heatpipes to be based on a U-shaped vapor chamber system.

In this way the heatsink is half the size of a system with heatpipes while improving performance. It is also not lacking in ARGB LED lighting and two 140mm fans.

The draw

We summarize once again how you have to do to participate.

  1. Watch the video above carefully.
  2. At the end of the video you will have a question about a product that is talked about in the video.
  3. Go to this form and write your answer.
  4. Do not forget to indicate your email just below in the same form to be able to contact you in case you are the winner.


The award, as we discussed, is a liquid refrigeration valued at 150 euros from the Cooler Master brand called MasterLiquid ML240P Mirage, presented during this same Computex 2019 fair and characterized by having a 240mm radiator, high-performance fans and lighting with ARGB control included.

To participate in the raffle it is necessary that you indicate the email in the field designated for this purpose in the participation form that you will find here below (not to be confused with the form to send comments).

Participation in the raffle will be activated from today until June 10, 2019 at 11:59 p.m. and on June 12, 2019 we will reveal the winner on this page.

IMPORTANT: The email to participate in the raffle must be put in the same survey. At the end of it there is a section where you expressly ask to put the email, after answering the question of the contest.

NOT TO Put neither the answer nor the email in the comments of this article, use the form that is right here below.

Likewise, we recommend that the survey be carried out from a PC or tablet for a greater experience and speed when conducting it.


The draw has already been carried out and the winner of the contest has been contacted at the email address provided: d *** pl **** br * wl @ gm ** lc * m (for security and privacy reasons they have been hidden some characters). As soon as we have your authorization to indicate your name here, we will make it public.

In case the form does not work, it can alternatively be completed by clicking here.

Leave a Reply

Your email address will not be published.

Back to top button
%d bloggers like this: